M INSIGHTHORIZON NEWS
// science discoveries

Do you have to open flue with gas fireplace

By Zoe Patterson

Our research shows that the flue on a gas fireplace should remain open during use or when the pilot light is lit. If the flue is closed in either instance, you risk a greater chance of carbon monoxide poisoning or a spark induced structure fire due to a buildup of toxins emitted by propane or natural gas burners.

Does the flue have to be open on a gas fireplace?

Our research shows that the flue on a gas fireplace should remain open during use or when the pilot light is lit. If the flue is closed in either instance, you risk a greater chance of carbon monoxide poisoning or a spark induced structure fire due to a buildup of toxins emitted by propane or natural gas burners.

Do all fireplaces have a flue?

Technically, a flue is any open vertical space in a chimney that allows smoke to escape the home from the firebox. But because every chimney’s flue must be lined, a chimney liner is usually referred to as the flue, as well. Every wood-burning or gas fireplace has a flue.

What happens if you don't vent a gas fireplace?

Without proper ventilation and safety systems in place there can be serious health risks associated with burning gas in a ventless fireplace. Ventless fireplaces produce small amounts of nitrous dioxide and carbon monoxide which can be deadly in large doses.

Is it OK to leave the pilot light on in a gas fireplace?

We recommend that you turn off your gas fireplace pilot light seasonally. Turning off your gas fireplace’s pilot light can save a substantial amount of energy and money. It is important to remember that not all gas fireplaces have “standing” pilot light, or, a pilot light that is “always on”.

Is it safe to leave gas fireplace on when not at home?

The short answer is this: gas fireplaces that are fully vented and have safely and properly sealed glass fronts are fine to be left alone to run continuously.

Do gas fireplaces give off carbon monoxide?

Yes, gas fireplaces are one potential cause of carbon monoxide poisoning. … An improperly maintained or ventilated gas fireplace can create incomplete combustion, creating carbon monoxide, and causing this toxic gas to linger—putting those inside at risk of carbon monoxide poisoning.

Does a gas fireplace need a chimney liner?

Homeowners with gas or electric inserts most likely do not need a new liner because those types of fuel don’t produce enough heat to damage a masonry chimney.

How is a gas fireplace vented?

In a direct vent gas appliance, fresh air is drawn from the outdoors into the hearth unit, and expelled air is sent outside via a flue system that terminates outside. Most direct vent gas fireplaces are vented to the outdoors horizontally (through the wall), but they can also be routed vertically (through the roof).

Should I turn off the pilot light on my gas fireplace in the summer?

Your Utility Bill Perhaps the most important reason to turn off gas fireplace pilot light in summer is because of the money and energy you will be saving. If you leave the pilot light on during the summer it is simply sitting there burning gas, which is wasting gas and contributing to an exorbitant energy bill.

Article first time published on

Does gas turn off when pilot goes out?

This is because all modern gas appliances with pilot lights have a fail-safe device that closes off the gas to the appliance in the case when the pilot may go out. … If the pilot light goes out for any reason, the current stops, the valve closes, thus preventing any gas from leaking.

Why are flames blue in gas fireplace?

You get a blue gas flame with a hydrocarbon gas when you have enough oxygen for complete combustion. When you do have sufficient oxygen, the gas flame appears blue because complete combustion creates enough energy to excite and ionize the gas molecules in the flame.

Are fumes from gas fireplace harmful?

Gas fireplaces are generally considered cleaner than traditional wood-burning fireplaces, but they can also pollute indoor air quality if not properly vented. Toxic gasses emitted include deadly carbon monoxide and nitrogen dioxide — a gas particularly harmful to those with asthma.

How do I know if my gas fire is leaking carbon monoxide?

  1. You see black, sooty marks on the front covers of gas fires.
  2. There is heavy condensation built up at the windowpane where the appliance is installed.
  3. Sooty or yellow/brown stains on or around boilers, stoves, or fires.
  4. Smoke building up in rooms.

How can I tell if my gas fireplace is vented?

Turn on the fireplace. If the flames reach above the gas logs and the look like a wood burning fireplace, then the logs must be vented. If the flames are small, an have a blue cast, the fireplace is vent-free.

Can you sleep with gas fireplace on?

There is a risk of carbon monoxide poisoning when you sleep in a room where a conventional coal or gas fire, a log burner, a cooker, or a back burner is left on overnight. You cannot feel the early symptoms of carbon monoxide poisoning, so it is important that you protect yourself.

Can gas fireplaces explode?

Although convenient, these home gas fireplaces pose significant risk of explosions and house fires if they are improperly installed or maintained. Gas Fireplace leaks can result in carbon monoxide poisoning, but can also result in explosions that can level an entire neighborhood block.

Is it cheaper to run a gas fireplace or the furnace?

Is it cheaper to run a gas fireplace or a furnace? … A modern furnace is more efficient in turning gas into heat than a gas fireplace. This means that although a furnace costs more to run per hour than a gas fireplace, it turns more of that energy into heat and can warm a whole house rather than a single room.

Does a gas fireplace dry out the air?

Gas fireplaces make the air dry and create moisture–that is the answer to the question. Gas fireplaces create moisture in the air, while simultaneously drying the air out. Of course, to fully understand what that means, we’ll have to dive in deeper. Let’s actually start with traditional wood-burning fireplaces.

What is difference between gas fireplace and gas insert?

A gas insert is installed within an existing masonry, wood burning fireplace. A gas insert is smaller than a gas fireplace to allow it to fit inside of the opening of an existing wood burning fireplace. … A gas insert can get much hotter on the outside (no, not that hot) than a gas fireplace.

Do gas fireplaces use a lot of gas?

In short: Gas fireplaces are quite inexpensive to run. This is primarily due to the low cost of natural gas and propane. On average, 100,000 BTU worth of heat costs $1.09 if you use natural gas and $3.87 if you use electricity.

Can you vent gas fireplace into chimney?

A gas stove can be vented through an existing chimney, whether it is a manufactured or masonry chimney. To ensure proper venting, however, a liner must first be installed in the chimney. … In a B-vent system, a substantial amount of heat is lost through the chimney.

How do you vent a gas fireplace without a chimney?

If you don’t have a chimney, a natural vent system can also use a pipe venting system, which is typically installed through the roof. Here, you can get around having to use a brick and mortar chimney to rid the home of fumes and use a pipe system instead.

Is a flue liner necessary?

Secondly, while not mandatory, flue liners are highly recommended by most stove installers, and for good reason. Along with offering improved safety, cleanliness and efficiency, one of the main benefits of fitting your stove with a flue liner is also better performance.

Does a pilot light produce carbon monoxide?

A yellow or orange pilot light will produce carbon monoxide – an odourless, colourless gas that can fill your home and cause carbon monoxide poisoning. Symptoms of this condition include dizziness, headache, fatigue, nausea, unconsciousness, brain damage and death.

How much does it cost to run a pilot light on a gas fireplace?

A pilot light is a small flame that is kept lit to provide a catalyst for the main burner to be turned on when needed. The average fuel consumption of your standing Pilot light is: Natural gas is $0.60 a day = $219 a year.

Should the pilot light always be on in a gas heater?

Most furnaces with electronic ignition have a device called a hot surface igniter. … The difference is that the flame is only lit (by an electronic spark) when your furnace is ready for a heating cycle. When the pilot light is not needed, it is completely off, saving you money on gas.

Do all gas fireplaces have a shut off valve?

Each gas appliance should have a gas line running to it that will have a valve located just before the appliance.

When should pilot light be turned off?

A little heat is produced when your pilot light is on so turning it off in summer can help reduce the heat inside your home. The less heat there is, the less you have to use your air conditioner needs to cool down the house. You can get savings and conserve energy if you turn off your pilot light.

What do you do when the pilot light goes out on a gas fireplace?

If possible, shut off the main gas supply valve by turning it clockwise (to the right). Once at a safe distance, report the potential gas leak to your propane dealer or 911. Do not return to the building until a qualified service technician or EMT says that the building and gas system are safe.

What should gas fireplace flames look like?

Healthy Flames A healthy gas flame will burn steadily with a yellow or orange. If the flame is not yellow or orange it may be a sign that your gas fireplace needs adjusting or cleaning, which should be done by a qualified technician, such as those we have at Kozy Heat.