M INSIGHTHORIZON NEWS
// business trends

How do I control the temperature in my grow room

By Andrew Mclaughlin

Ensure it is properly sealed and insulated.Monitor lighting and maintain a specific temperature range.Increase the cool air supply.Make sure stagnant water pools don’t form.Use an appropriately sized dehumidifier.

How do I control the temperature and humidity in my grow room?

  1. Ensure it is properly sealed and insulated.
  2. Monitor lighting and maintain a specific temperature range.
  3. Increase the cool air supply.
  4. Make sure stagnant water pools don’t form.
  5. Use an appropriately sized dehumidifier.

How do I control the heat in my Grow Tent?

By placing an air conditioner inside the tent, you have direct control over your plants’ environment. Just be careful not to cool things down too much. Even an oscillating fan can help you manage heat. A fan disperses heat and can circulate the air to prevent stagnation.

Where should I put my thermostat in my grow room?

For best results, the thermometer should be placed in an area that is away from direct light. This ensures that light hitting the thermometer does not raise the temperature being read, thus providing a false reading.

Can I use Damp Rid in my Grow Tent?

DampRid Moisture Absorber: Damp Rid absorbs excess moisture in the air and your plants get rid of the mildews and molds. DampRid only removes the excess moist air around it. So for a larger grow tent, you will need more than one container.

How hot is too hot for grow room?

If you are growing marijuana in a grow room, keep in mind, the maximum temperature for marijuana grow tent success is 85°F. Temperatures higher than this will result in the plant’s death.

How do I cool my grow room?

  1. Invest in an Air Conditioner or Fan.
  2. Use a Swamp Cooler.
  3. Insulate or Relocate Your Growroom.
  4. Monitor and Control Humidity.
  5. Rethink Your Lighting.
  6. Raise the Lights.
  7. Install a Light Mover.
  8. Run Lights at Night.

Where should I place my hygrometer?

Locate your hygrometer in a living area away from the moisture produced by the kitchen or a bathroom. For maximum heating effectiveness and comfort, humidity levels should be between 30% and 50%.

How long should a fan be on in a grow room?

Ideally, your extractor fan system should replace the air in your grow room every minute, or at least every three to five minutes.

How do you dehumidify a grow tent without a dehumidifier?

In case you use intake fan instead of holes, boost up the power(CFM) of it. Instead of using ‘just’ oscillating wall fans, using floor fans as air circulators throughout the grow room is an effective idea. These fans can pull air through the plant canopy and ensure a proper exchange of old, humid air with fresh ones.

Article first time published on

How do I lower the humidity in my grow tent without a dehumidifier?

  1. Avoid overwatering your plants. …
  2. Use a Dehumidifier Inside your Grow Tent. …
  3. Check your plant density. …
  4. Remove stagnant water. …
  5. Improve ventilation by adding more fans. …
  6. Create air holes. …
  7. Purchase an air conditioner.

What size dehumidifier for 2x2 grow tent?

This 30-pint dehumidifier ensures optimal moisture removal in grow rooms up to 1,500 square feet. It is the best dehumidifier for 4 x 4, 5 x 5 and even 2 x 2 grow tent areas.

How can I cool my grow room without AC?

  1. 1.1 Switch To LED Grow Lights.
  2. 1.2 Put Ballasts Or Drivers Outside The Grow Tent.
  3. 1.3 Cycle Air In And Out Of The Tent.
  4. 1.4 Run An Oscillating Fan In The Grow Tent.
  5. 1.5 Put A Swamp Cooler In The Tent.
  6. 1.6 Put An Air Conditioner In The Tent.
  7. 1.7 Run Lights At Night.

How much AC do I need for my grow room?

A general rule of thumb is that for every 1 watt of HPS light, the end user will need 3 BTU’s of cooling power. Personally, I always go 20% over this to amount to account for environmental fluxes. Thus a grower running 4x 1000 Watt HPS lights will need a minimum of 14,400 BTU’s of cooling.

How do you cool a sealed grow room?

There’s a handful of ways to cool your room; venting, air cooled hoods, water chilled lights/fans as well as water/air cooled air conditioning. Venting to the outdoors is the cheapest way to remove heat from your room.

Is 80 degrees too hot for seedlings?

So, how hot IS too hot for plants? The general answer is around 90 degrees F, with some exceptions to the rule. This means that when temps rise above 90 and remain there for a lengthy spell: Leaves wilt.

Should I leave my fan on when lights are off?

As always, both exhaust and oscillating fans should be running during the light hours. … And turn the other fans off after 1 hour after the light goes off.

Should I open vents in grow tent?

Why Venting Your Grow Tent Is Important. Having ventilation for your grow tent is critical. Without fresh air coming in and stale air going out, plants can become anemic and probably wither and die. … Much better to use inline fans for your grow tent, to suck air out and bring fresh air in.

Do plants need fresh air at night?

At night, most plants actually reverse the process of photosynthesis. They take in oxygen and release carbon dioxide. This means that when daylight comes again, the plants take in “stale” air from the night before. Supplying fresh air at night is especially critical to maintaining consistent plant health.

How do I know if my hygrometer is accurate?

Dampen a towel (not dripping wet, but good and damp), then wrap the hygrometer in the towel for 30 to 45 minutes. Then unwrap it and read the humidity (quickly). If your hygrometer is perfectly calibrated (few are) it will be reading exactly 100% humidity.

What should my hygrometer read?

The hygrometer should read 75%. If your hygrometer is reading below or above 75%, you will need to adjust the reading to register 75%. For most analog hygrometers, simply adjust the needle to read 75% on the gauge by turning the screw on the back of the hygrometer with a small screwdriver.

How long does it take for a hygrometer to get an accurate reading?

For digital hygrometers, you will only have to place the instrument at about 3.3 feet (one meter) from the ground. Let the device work for at least three minutes so it can adequately detect the temperature of the air.

How do you make a homemade dehumidifier?

  1. Get a small bowl that will fit in the area you’d like to place it in.
  2. Fill the bowl full of baking soda.
  3. Place the bowl in the area you’d like to dehumidify.
  4. The baking soda will harden as it absorbs moisture, and at that time, you’ll want to replace it with fresh baking soda.

Do fans lower humidity?

Switch on Ceiling Fans When it is warm, and you are looking for an effective yet inexpensive way to reduce humidity, ceiling fans are a straightforward solution. When you turn on a ceiling fan, the breeze evaporates excess moisture, which makes you feel cooler.

Do I need a dehumidifier in my grow room?

Having a dehumidifier inside the grow tent is essential. High humidity in the environment is not good for a plant either. Having the air evenly circulated and free from moisture can be done by installing a dehumidifier in the grow tent or grow room.

Where should a dehumidifier be placed in a grow tent?

In a small grow room, locate the dehumidifier to maximize airflow over the grow area. For larger grow rooms where multiple units are required, space the units out evenly to maximize coverage. For suspended units, locate them above or next to the grow lights for maximum effectiveness.

How do you use DRI Z air?

To use Dri-Z-Air, remove the clip and lift off the upper half of the grill-work compartment. Open one envelope of crystals and empty it into the bottom half of the grill-work compartment. Replace the top half of the grill-work and the clip. Dri-Z-Air is ready to use.

What is the smallest grow tent?

The Dark Propagator 60 from Secret Jardin is by far the smallest tent on this list. It is only 2 feet wide by 1 and a third feet deep and 2 feet tall (60 x 40 x 60 cm). If you need a bit more space, the Dark Propagator 90 is 35.5 by 23.5 by 35.5 inches.

How do I keep my tent cool in the summer?

  1. Disassemble Your Tent During the Day. …
  2. Set up Your Tent in the Shade. …
  3. Use a Reflective Sunshade. …
  4. Make Use of the Breeze. …
  5. Check the Weather and Remove Your Rain Fly. …
  6. Choose a Tent With Lots of Mesh. …
  7. Get a Portable Fan. …
  8. Try Sleeping in a Hammock.

How can I cool my grow room in summer?

  1. Run Lights At Night. This is the coolest time of day! …
  2. Swap to cooler lights. Lots of growers like switching to LED lights or CDM lights in summer – we ran a test and found your room will run a few degrees lower by doing this. …
  3. Keep Ballasts Outside.

How do I keep my LED grow lights cool?

Water-Cooled Rigs These work by using a circulator pump that pushes cold water through ducting around the lights. The heat dissipates into the water, then moves along into a chiller, before back up and around again. If the option is available, water-cooled rigs are an amazing way to keep a grow tent cool.