How do I measure for a new toilet

Measure from the wall behind the toilet to the center of one of the closet bolts (which hold the toilet down). If the toilet has four closet bolts, measure to the center of one of the rear ones. Then measure from the center of the mounting holes to the back of the new toilet you’re considering.

How do I know if my toilet is 10 or 12?

If your toilet has four bolts rather than the standard two, you’ll measure to the center of the rear bolts. The standard rough-in measurements are 10, 12 and 14 inches. If your measurement is in between these intervals, round your number down to the nearest standard measurement.

How do you measure toilet rough-in?

The rough-in measurement of a toilet refers to the span between the wall behind the toilet and the center of the waste pipe. To measure the rough-in for your toilet, measure from the wall behind the toilet to the middle of the bolt caps (the caps holding your toilet to the floor).

How do I know which toilet to buy?

To determine the size of your toilet rough-in, measure from the wall behind the toilet to the bolt caps of your current toilet. …
Most toilets are available in a 12-inch rough-in, which is the standard distance, but a 10- or 14-inch rough-in may be needed in some homes.

Can a toilet be more than 12 inches from the wall?

You can, but the back of the toilet tank will be two inches further away from the wall. The “rough-in” dimension refers to the distance from the wall framing (½-⅝″ behind the finished wall surface) to the center of the sewer pipe on the floor. Standard rough-in is 12 inches.

Do all toilets fit the same?

For a standard toilet, the rough-in measurement should be between 11 inches and 13 inches. … If the rough-in measurement is not between 11 inches and 13 inches, a standard toilet will not fit the space, and you will need to look for a toilet designed for that specific rough-in distance.

Can you replace a 10-inch rough-in toilet with a 12-inch rough-in toilet?

The rough-in for your bathroom plumbing should match the rough-in for the toilet. Even if a toilet is designed for a 10-inch rough-in, you can still install it in a space with a 12-inch rough-in.

What are the sizes of toilets?

Standard toilet dimensions are typically between 28–30″ deep, roughly 20″ wide, between 27–32″ high, and have a rough-in between 10–14″. Now you can find the perfect toilet.

Is my toilet elongated or round?

Measure the length of the toilet bowl from the center of the toilet seat bolt holes at the back of the toilet, to the front edge of the toilet bowl. Round toilet bowls measure at about 16.5 inches. Elongated toilet bowls measure about 18.5 inches. That’s it.

Is a 1 piece or 2 piece toilet better?

Performance-wise, there is no difference between the one-piece and two-piece toilets. They can have the same flushing power and efficiency. The interior parts are almost identical if they are from the same manufacturer. They may even have the same features and specifications.

Article first time published on

Which is better one piece or 2 piece toilet?

One piece toilets are typically heavier and easier to clean, and there’s less space for bacteria to grow. Because two piece toilets feature a detachable tank, they’re more customizable for preferred styles and heights. Both styles can include bells and whistles like bidet attachments or low-flow energy saving.

How much should it cost to have a toilet installed?

National Average: $372 According to HomeAdvisor, toilet installation costs range from $224 to $531, with the national average at $372. The overall cost depends on the type of toilet and the complexity of the job. It takes approximately 2 to 4 hours for a plumber to install a toilet at a base rate of $65 per hour.

How far should a toilet be from the back wall?

The Distance To Set The Toilet Flange From The Back Wall. You’ll want to set the center of the water closet flange 12 inches from the finished back wall.

How far should a toilet be from the side wall?

Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture. (The NKBA actually recommends 32 inches.) There should be at least 24 inches of clear space in front of a toilet or bidet.

Can I move a toilet a few inches?

Yes, you can actually move a toilet. Even moving a toilet by a few inches without having to make a new hole in the floor is possible. You can use an offset toilet flange to move the toilet by a couple of inches on any side. This will allow you to use the same wastewater line and in turn help to save you a lot of money.

What does 12-inch rough-in toilet mean?

The toilet rough-in refers to the distance from the finished wall to the center of the toilet’s floor drain or waste outlet. Most toilets have a rough-in of 12 inches, although it’s not uncommon for older homes to have an unusual size such as 10″ or 14″. … Rear-outlet toilets are configured a bit differently.

Do toilets have different depths?

Toilets have many standard measurements, including height, width and depth or length. The width is 15 inches, height is just over 18 inches and the depth is 18.9 inches.

Why would I want an elongated toilet bowl?

Elongated bowls are also considered more ‘hygienic’ in that the larger surface area of the bowl makes is easier for men and children to use with less mess. The longer bowl size is also a requirement for ADA use, and the longer/wider bowl is generally easier to use for those with mobility issues.

Can I replace a round toilet with an elongated toilet?

Yes and Make the rough in distance from the back wall 13–1/2 inches and 16- 1/2 inches high toilet from the floor. and place it 1ft 6 inches from any side wall.. That will be perfect and then you can enjoy it.

Are toilet sizes universal?

Are there different sizes of toilet? Yes, toilets come in a range of different sizes, that’s why it’s important to measure your existing toilet seat before you buy.

Do toilets have different size holes?

Not every toilet requires the same size hole, and clearances also vary, but there is a standard size and placement that works for most models.

Are dual flush toilets better?

A dual flush toilet drives lower water usage in your home, thereby saving money on your monthly water bill. The Environmental Protection Agency (EPA) estimates that 4,000 gallons of water can be saved annually in homes that use dual flush toilets.

Are Square toilets comfortable?

Although most of us are used to circular varieties, the square toilet seat is often said to be more comfortable than traditional shapes. This is because a square toilet seat often delivers more support underneath the thighs when seated – much like a chair.

Which toilet shape is most comfortable?

Comfort: Most adults feel an elongated-style toilet bowl is more comfortable to sit on than a compact-size toilet bowl because the longer seat supports more of the thigh and because there is a larger opening, making it easier to reach down inside the bowl to wipe yourself after using the toilet.

What are the different toilet heights?

Toilet height is measured from the floor to the top of the seat. Heights vary enough to be noticeable. Most often, they fall somewhere between 15” and 19”, with standard toilets coming in under 17”. However, chair height toilets, what Kohler refers to as Comfort Height® toilets, measure 17” or more.

What are the three types of toilet?

Wall Hung toilets.
Close Coupled toilets.
Back To Wall toilets.

What comes with a new toilet?

When you purchase a new toilet, it should come with most of the parts that you’ll need. Check the box and make sure it includes brass closet bolts (to connect the toilet to the flange), and a gasket for connecting the tank to the base, a wax ring, a fill valve, flush valve and flapper.

How often should toilet be replaced?

Typically, toilets need replacement after 25 years of use so this can be considered the average toilet lifespan. Some would argue that the porcelain toilet itself has a much longer, and even unlimited, lifespan and that it’s only the components inside that need repairs and replacements.

Is Glacier Bay toilet a good brand?

Glacier Bay is a good-quality product that is popular among Home Depot shoppers. There are a range of Glacier Bay toilets and related products available for sale at Home Depot, including spare parts to replace existing toilets. Glacier Bay also offers lifetime warranties on its products to ensure customer satisfaction.

What are tankless toilets?

A tankless toilet does not rely on a tank of water to clear the bowl. Instead, it receives water from a supply line that has a high enough pressure behind it to force waste through the drainage system. It uses the same amount of water as the tank toilet, but the water enters the fixture at greater pressure.

What is the difference between single flush and dual flush toilets?

Single-flush Toilets They have only one flush mechanism — meaning that all types of waste are flushed with the same amount of water, sometimes as much as 5 gallons. Dual-flush toilets, on the other hand, have two flush mechanisms — normally, two buttons located on the top of the tank instead of a lever.