How do you use a Scotts triple action Turf Builder

Watering Tips Water lawn 24 hours after application. Do not apply if rain is expected within 24 hours after application.

When should I water after applying Scotts triple action?

Watering Tips Water lawn 24 hours after application. Do not apply if rain is expected within 24 hours after application.

How long does it take for Scotts Turf Builder triple action to work?

Liquid Turf Builder goes to work immediately, according to the lawn food section of the Scotts company’s website, and begins to green up the lawn within 24 hours. The granular form of Turf Builder, which you need to water in to activate the fertilizer, takes two to five days to show results.

How do you use Scotts Turf Builder triple action?

1. Apply to dry lawn: Make sure grass is dry prior to application.
2. Fill and Set Spreader according to spreader settings on label.
3. Water-in product to lawn after application. Do not water to the point of run-off.
4. Clean-Up: Sweep product from hard surfaces onto the lawn.

How long should I wait to mow after applying Scotts triple action?

While each weed and feed product has specific instructions regarding mowing, generally you can mow the lawn one to two days before applying any weed and feed product or wait and mow at least one day afterward. Leave the grass clippings on the lawn for the next three mowings after application.

What do I use after Scotts triple action?

Then, 6 to 8 weeks after using Triple Action, apply Scotts® Turf Builder® Lawn Food according to label directions to continue giving your lawn the nutrition it needs to keep growing strong. If you live in the South: Southerners have particular challenges with lawn management.

Should I mow before applying Scotts triple action?

Mowing. It is recommended that you mow a few days before applying weed and feed and that you wait a few days after applying to mow again. This ensures that the herbicide — the “weed” part of weed and feed — has time to be absorbed through the leaves of the weeds and can begin to work.

Can you put Scotts Turf Builder on wet grass?

Most Scotts® fertilizers can be applied to either a wet or dry lawn. If you’re applying a weed-and-feed product like Scotts® Turf Builder® Weed & Feed, though, you may need to apply to wet grass to help the particles adhere to the weeds for best results.

When should I apply Scotts triple action before it rains?

1) Check the Weather: If rain is in the forecast in the next 24 hours, apply Scotts® Turf Builder® Triple Action another day. Rain can wash the particles off of weed leaves before they have a chance to work properly.

How do you use Turf Builder without a spreader?

If you have no other way to do it, you can certainly spread it by hand. Just make sure to use gloves and apply it very carefully. Walk backward, throwing fertilizer out as you go in a sweeping motion. Of course, you can use water-soluble or liquid fertilizers with a hose too.

Article first time published on

How soon can I mow after fertilizing?

How long should I wait to cut my lawn after you have applied fertilizer? After a fertilizing treatment you need to wait only 24 hours to mow the lawn.

When should I use Scotts Turf Builder?

Apply Scott’s Turf Builder when the grass is damp, such as after a rain or during the morning dew. Turf Builder works best when the temperature is between 65 and 90 degrees. Apply it when the weeds have already sprouted in your lawn, in the spring until the fall.

Can you put grass seed and turf builder down at the same time?

Scotts Super Turf Builder with Plus 2 Weed Control works on several species of lawn grasses. While the company’s website recommends waiting four weeks to put down grass seed after applying the weed and feed, seeding first means waiting a different length of time before you use the product.

Should I water after applying Scotts Turf Builder?

After applying Scotts® Turf Builder® Weed & Feed₃ you don’t water your lawn for at least 24 hours. Just like rain, watering your lawn after applying Scotts® Turf Builder® Weed & Feed₃ washes the weed control particles off of weed leaves before they can fully work.

Is Scotts Turf Builder triple action safe for dogs?

Answer: Scotts Turf Builder Weed and Feed 3 is safe for pets when it is used according to the product label. … Once the treated areas dry completely, chewing or eating grass will not be harmful and your pet can resume normal activity within the area.

How do you spread Turf Builder?

Apply the Turf Builder in a back and forth direction across the lawn. For more thorough coverage, divide the spreader setting in half and spread the Turf Builder in a north to south and then east to west direction so you overlap the product across the entire lawn.

Should you water after fertilizing?

Fertilizer and Water After grass dries, apply fertilizer. Then lightly water again. This second watering is vitally important, because it washes fertilizer off grass blades and into soil. You can also time fertilizer application between rainfalls to let rain wash fertilizer into soil.

Can I use Scotts Turf Builder in the summer?

Scotts Turf Builder Annual Program Summer strengthens your lawn so it can stand up to the hot months and allows your lawn to maximize water usage by driving water into the soil. Buy all four to keep your lawn strong all year long.

What if it rains after I apply Scotts Step 2?

Do not water or mow your lawn for 24 hours after application or apply if rain is expected within the next 24 hours. Delay application on newly seeded, sodded, or sprigged areas until new grass has been mowed 4 times. Wait at least one month after using this product to seed, sod or plant grass sprigs.

Can I spread Scotts Turf Builder by hand?

The product label for Scotts Turf Builder Bonus S Southern Weed and Feed 2 does specify that the product should not be applied by hand or in a hand-held device. This restriction may be in place to limit the risk of exposure for the applicator, such as skin contact.

Do I fertilize my lawn before or after rain?

Ideally, you should aim to fertilize about two days after rain or watering, and when the next heavy rainfall is at least two days away. It can be helpful to have some rain before and after fertilizing. Rain a couple of days before fertilizing keeps your yard moist and the turf healthy, receptive to the nutrients.

What setting do you put fertilizer spreader on?

Set your spreader so that it’s ¾ open when engaged. If, for example, the spreader is calibrated 1 to 20, set it at 15. Place eight pounds of Milorganite into the spreader’s hopper.

HOW LONG CAN fertilizer sit on lawn?

Although the best practice is to water fertilizer into your lawn immediately after you have applied it, you can wait up to 24 hours after fertilizing before you water during cool weather or if you are using a slow-release fertilizer.

How do you water your lawn after fertilizing?

How Much to Water Your Lawn After Fertilizing? The general rule for watering a lawn is 1 to 2 inches per week. The best way to achieve this is to think of giving your lawn a good “soaking” with deep waterings. The goal is to soak your lawn until the soil is moist to a few inches deep.

Can you mulch after fertilizing?

When you mow the lawn after fertilizing, the clipped grass blades act as mulch barriers for the newly applied nutrients. … Although you need to time the mowing carefully after fertilizing, both actions work well together to improve the lawn’s health.

Does Turf Builder really work?

Turf Builder is known to build a thicker lawn, and it can help control those weeds without the need for an additional weed-killing chemical. While there are benefits for this type of fertilizer, it is still a synthetic product that could harm the soil.

Is Scotts Turf Builder a slow release fertilizer?

Scotts Turf Builder Lawn Food Why We Like It: The process behind this feed is to green up and thicken your existing lawn to help choke out any weeds through the growing season. Proper application should result in a lush, green lawn with very few, if any problem areas.

What month is best to put grass seed down?

Plant cool-season grass seed in late summer or early fall (when daytime temperatures lower to about 60 to 75 degrees) for best success. September is typically the best month, although you might be able to get away with seeding as early as mid-August or as late as mid-October; it all depends on the forecast.