How long does it take to fill a 12ft pool

Above Ground Swimming Pool Water Volumes by Size12 ft Round2,975 gals3,398 gals15 ft Round4,646 gals5,310 gals18 ft Round7,646 gals8,602 gals21 ft Round9,106 gals10,408 gals

How much water does it take to fill a 12 foot round pool?

Above Ground Swimming Pool Water Volumes by Size12 ft Round2,975 gals3,398 gals15 ft Round4,646 gals5,310 gals18 ft Round7,646 gals8,602 gals21 ft Round9,106 gals10,408 gals

How long does it take to fill a 10ft pool?

Takes a while to fill between 3 and 4 hours. The pump is on the lean side and although it filters the water the filter seems in drastically reduce the flow and can at times choke itself. We added in an ‘intex’ solar heater for the pool, which warms the water by 5 or 6 degrees.

How much water will it take to fill a 12x30 pool?

The pool is 30″ which is 30/12 == 2.5 feet, So the pool is 2.5 * 452 = 1130 cubic feet. Which is 1130 * 7.48 = 8452 gallons. 2 of 33 found this helpful.

How long does it take to fill up a 24 ft pool?

The average pool can take 12-24 hours to fill and that is only if you have a few hoses chugging away. When your family is chomping at the bit to dive in, that may as well be an eternity.

How many gallons are in a 12 foot Intex pool?

Measuring 12-Feet by 30-Inches and able to hold up to 1,718 gallons of water, this pool is the perfect size for any backyard fun.

How many Litres is a 12ft Intex pool?

Intex 12 Ft Prim Metal Frame Swimming Pool With Water Filter, Capacity: 6503 Litres.

Can I fill my pool overnight?

If necessary, clean the pool so that you will have clean water right from the start. … Although it may take several hours to fill your pool completely, make sure that someone is available to continuously checking on the pool. It is never recommended to leave your home during this time or to fill your pool overnight.

How much chlorine do I put in a 12x30 pool?

Pool Size (Diameter x Depth)Capacity (Gallons)Chlorine Bleach (Oz / Cups)10′ x 30″1,08114oz / 1.75C12′ x 30″1,48519.5oz / 2.5C12′ x 36″1,77923oz / 3C15′ x 33″2,58733.5oz / 4.25C

How long does it take to fill a 10 foot Intex pool?

For the smallest Intex Easy Set, that’s 10 feet in diameter and has a depth of 30 inches, it will take about 1.5 hours for it to be filled up to 80% of its capacity using a hose with a 12 GPM flow rate.

Article first time published on

How long does it take to fill an Intex Easy Set pool?

FREQUENTLY ASKED QUESTIONSEASY SET POOLSAnswer :No, but if you have a ground cover, you can roll the pool up inside it.Question :How long does it take to fill the pool with water?Answer :2-5 hours, depending on which pool, hose size and water pressure.

Can I fill my pool with a hose?

You can fill your pool with a hose from the tap, just like you would with city water. But remember that you’ll be moving many thousands of gallons of water through your softener system, so be sure to factor in the cost of salt and the electricity required to pump the water to your pool.

What is the cheapest way to fill a pool with water?

1. Your Water.
2. Call the water company and tell them you are going to fill your swimming pool. …
3. Run the hose to the pool with enough slack that the end of the hose is on the bottom of the pool.

How long after you fill a pool Can you swim?

Chlorine/non-chlorine chemicals – When adding chlorine or non-chlorine chemicals to “shock” your pool after a fill-up, wait about 24 hours or until levels are approximately 5 ppm. If you’ll only be adding liquid chlorine, it’s generally safe to swim after about 4 hours or until levels are 5 ppm or lower.

How long does it take to fill a 12 000 gallon pool?

Capacity GallonsHours 7 GPMHours 10 GPM< 1,000< 2 1/2< 25,000128 1/310,00023 3/416 2/315,00035 3/425

Will my pool fill faster with two hoses?

You have a 3/4″ line and all the water pressure of either a municipal water system or a water pump. Splitting that into two lines will not likely double the flow rate as there is a pressure drop, but it should increase the total flow rate considerably.

How much should I fill my pool?

Most pool professionals agree that the water level in both in-ground and above-ground pools should be at the midpoint of the pool skimmer.

How often should I put chlorine in my pool?

1. It depends on the pool, but for residential you can get away with once a week, with a mid week check. …
2. A major factor is how much chlorine that your chlorinator takes. …
3. Depending on your chemical needs, you probably need to add chlorine shock every two weeks.

Do I need to put chlorine in Intex pool?

For the greatest protection against algae, bacteria, and cloudy water, Intex pools should maintain a chlorine level of 2.0-4.0 ppm at all times. If you opted for the Intex Salt Chlorinator, you can make your own chlorine by adding the correct amount of Pool Salt to the water.

How many chlorine tablets does my pool need?

To use the right number of tablets, always round your pool volume up to the nearest unit of 5,000 gallons. For instance, your pool has a capacity of 20,000 gallons, you would add four chlorine tablets. But if your pool holds just 16,000 gallons, you’d still use four, three-inch chlorine tablets.

How many gallons does a 12 x36 pool hold?

DiameterHeightGallons10′30″100012′30″150012′36″180015′36″2800

How much pool shock do I need?

Typically for granular shock, you’ll need one pound for every 10,000 to 13,500 gallons of pool water. With over 8 million residential swimming pools across the US ranging from 5 thousand gallons to over 30 thousand gallons, the amount of shock you need to treat a swimming pool isn’t a one-size-fits-all answer.

How long do the Intex pools last?

Intex is a popular manufacturer of temporary above-ground pools. How long they last depends on a number of factors, but the simple answer is that the inflatable pools will last 2-4 years and the metal frame types will last between 4-8 years.

What is a good size for a swimming pool?

For a family of 8 people, a pool size of 18 by 36 feet is adequate. Even if you all decide to swim at the same time, there will be enough space for everyone. A rectangular shape is the best choice for this size of the pool. If there are six or less in your family, a pool size of 16 by 32 feet will be sufficient.

How Much Is gallon of chlorine?

The basic balance of chlorine to water is between 1 and 3 ppm, or 0.00013 ounces of chlorine per gallon of water.

How long can water sit in pool without chlorine?

I think the answer to your question is about 3-6 days. The problem is that the chlorine that you need to keep the bacteria in check is used up more quickly as the temperature rises, the activity increases, and as sweat and other body stuff is put into the pool.

Can you swim with chlorine tablets in pool?

Answer: Yes, when using tablets they can be present in the water while you swim. Also confirm with a test of the chlorine level to be sure the sanitizer level is safe for swimming.

Can you use regular bleach in a pool?

Clorox itself recommends using between 100 and 200 ounces of regular-strength bleach per 10,000 gallons of pool water — one gallon is 128 ounces, and many bottles of bleach are available in one-gallon or half-gallon sizes. Pool professionals tend to recommend more conservative amounts of bleach.

What is the fastest way to fill a pool?

1. #1. Garden hose using city water. The most straightforward way to fill inground swimming pools with water is to connect a garden hose to your outdoor spigot. …
2. #2. Water delivery service. …
3. #3. Well. …
4. #4. Fire hydrant using city water.

How long does it take a water truck to fill a pool?

This is common for people who are filling their pool with water for the first time. Filling your pool with a hose is certainly a sensible and viable solution. However, it takes an average of 12-24 hours to fill even a small pool.

How long does it take to fill a 10ft by 30in pool?

It will take 2 – 3 hours to fill the pool with a hose.