How wide is a built in fridge freezer

Integrated fridge freezers normally come in a standard width of around 55cm. However, we do stock some wider models that go up to around 60cm to make sure we cater for all cabinet sizes.

Are built in fridge freezers a standard size?

Integrated fridge freezers are usually a standard size so they can squeeze into a 60W x 60D housing unit. Remember, if you’re replacing an integrated model, make sure the split type is the same so that cupboard doors fit.

How much space does a built in refrigerator need?

Side Clearance – Plan for between one-half inch to one-inch of clearance on both sides of the unit. Rear Clearance – Allow between one to two inches of space at the rear of the refrigerator for proper airflow. Top Clearance – Ensure there is a minimum of one-half inch to one-inch of clearance on top of the unit.

What is the width of a built in refrigerator?

The typical built-in refrigerator towers over 80 inches and can be up to 48 inches wide, and will take a massive bite out of your budget—sometimes $10,000 or more.

Are all built in fridges the same size?

Integrated fridges are usually a standard size so that they’ll fit into a kitchen housing unit. You can find all product dimension on our product pages. … A counter depth fridge has a much shallower depth than a standard fridge. They’re usually taller and wider to make up the lost space.

How wide is a standard under the counter fridge?

Every under-counter fridge has a standard height of 82cm and a standard width of 60cm. Use a tape measure to check if your niche has the correct dimensions.

How much space does a fridge freezer need around it?

No need for a gap on the sides or behind. Whenever you buy a new fridge freezer, manufacturers will typically recommend you leave a 25mm gap around it to allow for ventilation.

Can a built in refrigerator be free standing?

So can a built in refrigerator be freestanding? No. They are literally built into the existing cabinetry, making the refrigerator a permanent fixture in the home. However, you have options with size and design, and some built-in models offer a freestanding version.

Are all built in appliances the same size?

Hi, generally integrated appliances are interchangeable between all brands of units. The important thing to check is that the width of the unit is correct for the appliance. eg. if it specifies a 600mm wide unit for the appliance, then ensure that is what you are using.

What size opening do I need for a 36 inch refrigerator?

To obtain the most integrated look, the cabinet or soffit above the refrigerator should extend out to the same depth as the side panels. The refrigerator opening must have minimum dimensions of 70″ high x 36-1/8″ wide x 24-1/2″ deep as shown at right.

Article first time published on

How close can you put a fridge to the wall?

The refrigerator should be at least two inches from the wall. Top — If you have back coils, you will need at least two inches of top clearance to dissipate heat, but for bottom coils, as little as one inch can be sufficient. Sides — Regardless of coil placement, the sides require the least amount of space.

How far should a fridge stick out?

In short, the answer is yes. Your fridge will need about two inches of space away from the wall in the back to allow for air circulation. On the sides, you’ll want your fridge to have about 1/8 inch for a standard fridge and about 1 inch on each side for cabinet depth.

Can I put a fridge freezer in a cupboard?

No, it is not safe to put a freezer in a cupboard. As stated early, it has poor ventilation. If the cupboard has a door that you are planning on closing, it means there would be little to no airflow. At first, you won’t notice anything in the freezer.

What is the average depth of a fridge freezer?

Although the average size of a refrigerator varies depending on the type of fridge (bottom freezer, top freezer, French door or side-by-side), standard refrigerator dimensions range from 28¾ to 39¾ inches wide, 61¾ to 71¼ inches tall and 28¾ to 34⅝ inches deep, with depth extending to 45 inches with the refrigerator …

What is the difference between a built in fridge and an integrated fridge?

What is the difference between integrated and built-in refrigerators? Both styles are built into the kitchen housing, however, one of the main distinctions of integrated vs built-in refrigerators is counter depth. Integrated models are completely flush whereas built-in models do have a protruding profile.

Can you put a built in oven next to a fridge freezer?

Placing your fridge next to your oven could force the fridge to work harder to achieve the desired internal temperature. For this reason it is advised that you position your fridge away from your oven.

What is a permanently installed refrigerator?

Built-in appliances are permanently installed in the kitchen, so they can’t be relocated, although they have longer life spans than freestanding units.

What is the difference between a built-in and a freestanding refrigerator?

Built-in fridges are generally taller than freestanding models, although they are limited to cabinet depth (24”) so they can be installed seamlessly flush with kitchen cabinetry. … Most built-in refrigerators have the compressors on top (as opposed to the bottom with most freestanding models).

What is a stand alone refrigerator?

A freestanding fridge is just what it sounds like: A refrigerator that stands on its own and just slides into place next to some cabinets or against a wall. It’s probably what you think of first when you think of a fridge, but it’s not your only option — and it might not be the best option for you.

Will a 36 inch fridge fit in a 36 inch space?

A 36 inch wide refrigerator should only be placed in an opening at least as wide as the manufacturer’s recommendation. Remember that appliances are NOT built to machine-shop tolerances and neither are cabinets.

What is the width of most refrigerators?

Standard refrigerator sizes range from around 24 to 40 inches in width, 62 to 72 inches in height and 29 to 36 inches in depth. Generally speaking, french door and side-by-side refrigerators will be larger in width and height, though counter-depth models are frequently available in these two configurations.

What is a hidden hinge on a refrigerator?

A hidden hinge, also known as a concealed hinge, is a hinge that can’t be seen when viewing the door from the front and/or side. If you have seen European-style hinges, you have seen concealed hinges. They are designed to create an aesthetic look, one that is seamless and can be made to match cabinetry, if needed.

Does a fridge need space on the sides?

Ventilation Space Make sure that your refrigerator can breathe. Without proper ventilation you can damage the fridge and cause it to consume more energy. You’ll need at least a quarter-inch gap for ventilation on the sides of the refrigerator as well as one inch on the back and top.

What is the most shallow refrigerator?

Above: The Liebherr 36-Inch Counter-Depth 4-Door French Door Refrigerator (CBS2082) is the most shallow on our list at 24 inches deep.

What size cabinet goes above a fridge?

In standard kitchens, the wall cabinets are typically 30 or 36 inches tall, with the space above enclosed by soffits. Where the cabinets run all the way to the ceiling, 48-inch cabinets are the logical choice. A 12-inch or 15-inch tall cabinet fits neatly over a refrigerator.

Are all refrigerators the same depth?

Counter-depth refrigerators are typically under 30 inches deep. By contrast, most full-size refrigerators are over 30 inches deep, often in the 35- to 36-inch range. So, in many kitchens, traditional refrigerators may stick out half a foot or more from the edge of the kitchen counters.

How much ventilation does a freezer need?

A minimum of 200cm2 of ventilation must be provided at both the top and the bottom of the cabinetry to allow correct airflow. Without the correct amount of ventilation, a cooling appliance cannot run or cool inside properly, longer running times will result and therefore higher energy costs will be incurred.

Where should I put a small freezer?

Other possible locations for placing a freezer include the kitchen, utility room, basement, garage, and laundry room. When space is limited, you may want to consider locating a freezer in a guest room or outdoor shed.

Can you fit freestanding fridge freezer in a cupboard?

Can A Freestanding Fridge Be Integrated? Sort of but not fully. A freestanding fridge freezer won’t be able to fit inside a housing cabinet, nor can it have kitchen cabinet doors attached to it – it’s just not designed to.

How wide is an American fridge freezer?

Generally, the width of the American Fridge Freezers is between 70cm and 100cm.