What do you use to put out a Class B fire

To extinguish a Class B fire, you want to cut off the oxygen. You can use carbon dioxide gas to dilute the oxygen available and stop the burning. Smothering the fire with bicarbonate (baking soda) or potassium carbonate will also work.

What extinguishers can be used to extinguish a Class B fire?

Carbon dioxide fire extinguishers extinguish fire by taking away the oxygen element of the fire triangle, and by removing the heat with a very cold discharge. Carbon dioxide extinguishers can be used on Class B and C fires.

Which fire is Class B fire?

Class B are flammable liquids fires such as fuel, gasoline, kerosene, white-spirit… Class B are flammable gases fires such as ethanol, propane, butane, acetylene, hydrogen, methane…

When using form a Class B fire is extinguished by?

Class B: Flammable liquids such as alcohol, ether, oil, gasoline and grease, which are best extinguished by smothering.

Which type of extinguishing agent is used to extinguish a Class B fire quizlet?

Halon 1301 and Halon 1211 are most commonly used as extinguishing agents for Class B and Class C fires.

How do you put out different fires?

Class A Fires – Extinguish with Water. …
Class B Fires – Extinguish by Depleting Oxygen. …
Class C Fires – Extinguish by Cutting Power. …
Class D Fires – Extinguish with Dry Powder Agents. …
Class K Fires – Extinguish with Chemical Fire Extinguishers. …
Professional Fire Damage Restoration.

What is a Class B fire caused by?

Class B – fires caused by flammable liquids such as paint, turpentine or petrol among others.

What are Class B and C fires?

Class B fires which involve flammable liquids and gases, solvents, oils, greases (excluding cooking oils/greases in depth) tars, oil-based paints and lacquers. Class C fires which involve energized electrical equipment.

What is a Type B fire extinguisher used for?

Class B fires involve flammable and combustible liquids such as gasoline, alcohol, oil-based paints, lacquers. Therefore, extinguishers with a B rating are designed to extinguish fires involving flammable and combustible liquids.

Which material is a Class B fuel quizlet?

Class B: Flammable liquids and gases such as gasoline, oils, paint, lacquer, and tar.

Article first time published on

What would be used to extinguish a gasoline fire quizlet?

Such fires must be extinguished using a non-conductive extinguishing agent such as carbon dioxide or a dry chemical. Carbon dioxide gas used on fires involving gasoline, paint thinner, hydraulic fluids, and flammable cleaning solvents. Class B extinguishers are pressurized with non-flammable carbon dioxide gas.

Which extinguishing agent should be used for a Class D fire quizlet?

A Class D fire should be extinguished using a: Select one: – carbon dioxide extinguisher. – clean agent extinguisher.

What chemical is in a Class B fire extinguisher?

The primary chemical used to fight these fires is monoammonium phosphate, because of its ability to smother fires in these types of materials. Fire extinguishers with a Class B rating are effective against flammable liquid fires.

What is powder extinguisher?

Dry powder fire extinguishers extinguish the fire primarily by interrupting the chemical reaction taking place and cutting off the oxygen supply. They can be used on fires involving solid combustibles, flammable liquids and electricity.

Will baking soda put out a fire?

With the lid on (and the heat off), the fire should quickly consume all the oxygen and put itself out. … Pour on Baking Soda – Baking soda will extinguish grease fires, but only if they’re small. It takes a lot of baking soda to do the job.

Does Sand put out fire?

Can Sand Put Out Fire? Given that you can’t set fire to sand, it won’t come as much of a surprise that sand can make an excellent agent for extinguish fire. You just sprinkle it over the top of the fire and use it to cut the burning material off from oxygen. In order for a fire to burn it needs fuel, heat, and oxygen.

How does salt put out fire?

That’s right, common table salt is actually an effective fire extinguisher if it is used in great enough quantities. The way that salt extinguishes flames is by starving them of oxygen. Fire needs oxygen to survive, spread and grow, and when the oxygen supply is cut off, a fire will eventually go out.

What are the 4 types of fire extinguishers?

Class A extinguishers will put out fires in ordinary combustibles such as wood and paper.
Class B extinguishers are for use on flammable liquids like grease, gasoline and oil.

Which of the following types of surfaces should a Class B fire extinguisher not be used?

Fire buckets can be used filled with water on Class A fires, or with sand to use as an absorbing agent on spilled flammable liquids (Class B). They must not be used with water on burning fat or oil or on electrical appliances.

Will CO2 put out a fire?

Carbon dioxide extinguishes work by displacing oxygen, or taking away the oxygen element of the fire triangle. … CO2s may be ineffective at extinguishing Class A fires because they may not be able to displace enough oxygen to successfully put the fire out. Class A materials may also smolder and re-ignite.

What material is a Class B fuel?

The Class B fire is defined as one that uses a flammable liquid or gas as its fuel base. Common liquid based fuel sources include petroleum based oils and paints, kerosene, and gasoline. Flammable gases such as butane or propane are also common fuel sources in Class B fires.

What types of materials do Class B fire involves quizlet?

Class B fires involve flammable and combustible liquids and gases, such as alcohol, gasoline, lubricating oils, and liquefied petroleum gas (LPG). Agents used to extin- guish special hazard Class B fires are carbon dioxide (CO2), dry chemical, and Class B foam. Class C fires involve energized electrical equipment.

For which type of fire should water be used to put out the flames?

Class A fires are the easiest to put out and you can use a water or foam extinguisher. The fire is smothered by extinguishing the fire’s heat supply. Class B fires involve flammable liquids rather than solids. Common causes for these fires include gasoline, alcohol, and oil.

Which extinguishing agent is effective on Class B and C fires but has limited use on Class A fires?

Water These extinguishers contain water and compressed gas and should only be used on Class A (ordinary combustibles) fires. Carbon Dioxide (CO2) extinguishers are most effective on Class B and C (liquids and electrical) fires. Since the gas disperses quickly, these extinguishers are only effective from 3 to 8 feet.

Why is using water to extinguish a flammable liquid fire not recommended?

Never use water to extinguish an electrical fire. Water is a good conductor, and there is some concern for electrocution if you were to use water to extinguish an electrical fire. … APWs extinguish the fire by taking away the “heat” element of the fire triangle.

Which extinguishing agent should be used for a Class D fire?

To date, the only type of Class D fire extinguisher is the Dry Powder extinguisher. The powder agent used may be either powdered graphite, granular sodium chloride or copper based, all of which are effective at separating the fuel (the ignited combustible metal) from the oxygen.

What type of portable fire extinguisher is intended for use on Class K fires?

Currently, the only effective extinguisher rated as Class K is the Wet Chemical fire extinguisher.

What does a foam proportioner do?

National Foam Proportioners utilize the water flowing through them to produce a venturi effect that induces foam concentrate into the water stream. Line Proportioners are venturi devices that introduce foam concentrate into a flowing stream of water at a controlled proportioning rate.

On which type of fires are stored pressure water mist extinguishers safe and effective to use?

Thus, a water mist extinguisher is safe and effective for use on classes A, B, C and K fires.

Where should a Class B fire extinguisher be placed?

Class A: Locations that contain ordinary combustible materials, including offices, classrooms, and assembly halls.
Class B: Workshops, storage areas, garages, warehouses, or service and manufacturing areas that contain flammable liquids or gasses.

Which extinguisher should you not use to put out a flammable liquids fire?

Water extinguishers are used on Class A fires involving solid combustibles. They are not suitable for fires fuelled by flammable liquids or where electricity is involved.