What size do fence palings come in

Thickness: Palings come in three standard thickness’s, 25mm, 19mm and 12mm. Wood is normally priced by volume so a 1.2m long 25mm thick paling will be almost twice as expensive as a 1.2m long 12mm paling.

What size are fence palings?

Commonly used paling sizes are 100 x 15 mm and 75 x 15 mm. Palings may be spaced or closely butted. Note: Shrinkage and other movement in palings can create gapping. Where total privacy is required, palings should be lapped (refer Sound Fences).

Do treated pine Palings shrink?

The main problem with treated pine palings is that they are sold as “wet” timber and not kiln dried. I’ve seen 100mm wide palings shrink down to 95mm when they dry out and if they’re not secured from every possible angle they’ll twist up like a piece of licorice.

How much do fence palings shrink?

For 100 mm wide palings, shrinkage of approximately 6 to 10 mm can be expected. Thora hardwood fencing may be stacked on the ground on evenly levelled gluts a minimum of 100 mm clear of the ground or any water ponding.

How do you calculate paling spacing?

Divide the total spaces area by the number of pickets plus one: 33 divided by 18 equals 1.83 (inches). This is the precise width of each space between pickets (and between the pickets and posts).

What are pine fence palings treated with?

With a copper, chromium and arsenic (CCA) preservative treatment applied, these treated pine fence palings are protected from fungal decay, borers and termite attack.

Are fence palings treated?

Treated Pine Palings are designed for long term outdoor use typically for fencing. They have been pressure treated with a water base preservative solution that protects against termites and fungal decay.

How do you overlap fence palings?

Overlapping your palings makes for a private, more attractive fence than simply butting them together. First, nail on the 150mm palings using the 40 x 2mm galvanised nails, leaving a 50mm space in between each paling. Keep the palings vertical as you go – check regularly with your spirit level.

Can you screw fence palings?

Poor Construction. The best way to protect your treated timber against the harsh Australian elements & ensure your hard work looks great for years to come is to nail, screw or fix your fencing correctly. … Nails for 15mm thick palings should be either 50 x 2.8mm (hand driven) or 45 x 2.5mm (gun nails).

What screws to use on fence palings?

Fastener length Whether you choose to use screws or nails, the length is crucial to the success of your fence. To attach preassembled panels or backer rails to posts, we recommend 18d to 20d nails or 3-1/2 in. to 4 in. long screws.

Article first time published on

Should you paint a treated pine fence?

Although it is recommended that a primer be used, your local paint retailer may recommend a quality paint that does not require it. Painting of CCA Treated Timber is not necessary to maintain its warranty. CCA (Wet, Unseasoned) CCA treated timbers can be primed and over-coated with Acrylic/Water based paints.

Should you paint a pine fence?

A pine fence with water-based preservative must dry thoroughly before painting. That can take as little as 90 days or as long as a year, depending on the type of lumber, the preservative and drying conditions. … If the water stays on the surface, the wood is too wet to take paint; if it is absorbed, it can be painted.

How long do treated pine fences last?

In fact, treated pine posts are said to last for 15 to 25 years, while hardwood posts last for 20 to 30 years. All of this means that if short term costs are your limiting factor, then treated pine is your best bet. If aesthetics is top priority, then hardwood is the way to go.

How far apart should I put fence posts?

Most fence posts can be spaced 8 to 12 feet apart. While this is a general criteria, it doesn’t cover all scenarios. For instance, high tensile fence can have larger spacing, requiring line posts every 15 to 20 feet for field fence styles, and as much as 20-30 feet for high tensile barbed and smooth wire.

How do you work out the m2 of a fence?

To work out the square meterage, simply times one length by the other, 1 x 2 = 2 meters squared, easy huh!!

Can you burn old fence palings?

Treated timber contains chemicals that can be harmful to the environment, your health or your children’s health. It should be safely disposed of, and never burnt or buried. Only put small amounts of treated timber offcuts in your regular rubbish bin.

What timber are fence palings?

Treated Pine Palings are designed for long term outdoor use typically for fencing. They have been pressure treated with a water base preservative solution that protects against termite and fungal decay.

What are fence palings made of?

Paling fences consist of treated pine palings, rails and plinth. Posts are usually mixed hardwood, cypress pine or treated pine.

How thick is a fence paling?

Standard Paling Fence It is constructed from plantation grown CCA treated pine timber. A single “skin” (layer) of 100mm wide palings is used. These palings are chipped on the top corners, butted up against each other and nailed onto 3 treated pine rails which are 75mm deep using Galvanised nails.

How many Palings are in a meter?

For palings, you have a 150 mm paling with a 50 mm gap between making 5 per meter. You then have a 100mm paling covering the 50mm gap with 25mm covering either side of the 150 paling again getting 5 palings per meter.

What is lapped and capped fencing?

A lap and cap fencing system consists of timber fence palings that are installed onto a metal frame leaving a gap of 30-50 mm between each paling.

What kind of nailer is used for fencing?

A framing nailer is used for larger projects such as fencing, deck building, roof sheathing, sub-flooring, and (of course) framing. Framing nail guns drive some of the larger gauge nails, from about .

What does the word Palings mean?

1 : a fence of pales or pickets. 2 : wood for making pales. 3 : a pale or picket for a fence.

How many nails are in a picket?

Initially, install only two nails per picket. At the end of the run, you can then go back and hit the remaining nails. This is recommended in case you do make a mistake or get out-of-plumb which will be evident at the end of each run.

How do you replace a paling on a fence?

1. 1Remove old or broken fence palings. Starting at the base of the paling, use your wrecking bar or ‘jemmy’ to pry the board off the horizontal rail. …
2. 2Measure and cut your new palings. Measure and mark up your timber to length. …
3. 3Nail the new palings onto the fence. Rest your paling on the base of the fence.

What size are fence rails?

The most common size for rails is 2” x 3” or 2” x 4”. Maximum post spacing is 8′ between posts; thus, a 2″ x 4″ x 8′ rail would be used. If you are doing an 8′ tall fence, we recommend using a 2″ x 4″ x 12′ rail and setting your posts on 6′ centers. This is the foundation of the fence.

Are nails or screws better?

When deciding between nails and screws, keep in mind that nails are less brittle, so they provide greater shear strength. … Screws, on the other hand, may not be as forgiving, but their threaded shafts hold better in wood and draw boards together much more tightly and they have greater tensile strength.

How many screws are in a 1lb box?

After multiple random samples I found that there were 77 screws per pound. Every sample would be just shy of a full pound with 77 screws, yet go over with the addition of one more screw.

Can you stain treated pine fence palings?

This option is best if you want to dramatically change the colour of the treated pine but keep that natural timber appearance. … Stain is available in oil and water based options, see your local hardware store for choice of quality and colours.

How do you paint palings on a fence?

1. Step 1: Clean and Dismantle. Before doing anything else, get rid of the specks of dust, debris and other surface attachments that are not part of the fence itself. …
2. Step 2: Scrap It And Fill The Cracks. …
3. Step 3: Prepare the Fence and The Sprayer. …
4. Step 4: Start Paint Coatings. …
5. Step 5: Wrap Things Up.

Do you have to stain a pine fence?

It is not necessary to stain treated pine; however, you may choose to do so to add color to your fence.