What size slab do I need for a hot tub

Generally, hot tub slabs are less than 10 feet by 10 feet but base your decision on the size of your hot tub and the location. Excavate the location but don’t dig deeper than 4 to 6 inches, as a stable, concrete slab requires solid soil beneath it for stability.

How big is a slab of concrete for a hot tub?

Slabs for hot tubs generally are 8 feet by 8 feet.

How thick does a hot tub base need to be?

The concrete base needs to be a minimum of 4 inches thick (ideally 6 inches) so it is able to withstand the weight of the hot tub. It is also a good idea to place rubble to the foundation for maximum support or reinforce the concrete base with rebar.

Will a concrete slab hold a hot tub?

So long as it is flat and without grade, it will likely work for your new portable hot tub. … Usually a concrete slab made to building code is suitable to hold a hot tub. However, many patios and other concrete slabs are pitched for drainage, which may make an unsuitable base for your hot tub.

How much does it cost to pour a concrete slab for a hot tub?

A concrete slab costs $5 to $10 per square foot or between $500 and $2,500 for a hot tub. Other options for a hot tub foundation pad are an existing patio, gravel base, pavers, reinforced deck, or plastic spa pad.

Can I put a hot tub on gravel?

Gravel has two main advantages, it is good for drainage and easy to install. First, you will need to remove about 6 inches of soil before lining the hole with landscaping cloth and placing a 4 inch layer of gravel on top. … So yes, a hot tub can sit on gravel!

How big should a pad be for a hot tub?

The minimum thickness safety requirement for a basic hot tub pad is 4″ thick reinforced concrete with a diameter of 6″ less than the diameter of the bottom of the tub. Therefore, a 5′ round straight sided wood hot tub would require a 4′ 6″ square pad.

Can I put a hot tub on pavers?

Pavers which are not rated for a driveway may not be suitable for being the base of a heavy hot tub. If the pavers cannot sustain weight, they will crack and make the tub installation unstable. Install your tub on pavers only when the surface is even and can support the tub’s weight when filled with water.

Can you put a hot tub on a cement patio?

Outdoor hot tub placement, such as decks, concrete or brick patios, is common. However, the hot tub can be placed on any solid, uniform, level surface. Do not place your hot tub on grass or bare ground.

How many bags of concrete do I need for a hot tub pad?

For most DIY concrete slabs, the best material to use is a ready-mix crack-resistant concrete mix like QUIKRETE. A concrete base for a spa should be around 4 inches thick. This means that for an 8’x8′ spa pad, you’ll need enough concrete to fill 21.33 cubic feet (that’s 36 80-lb bags of QUIKRETE).

Article first time published on

What is the best base to put under a hot tub?

We recommend a concrete pad that is at least 10cm thick. We also recommend the concrete to be sloped at 1.5cm per 3.5m, this ensures water runs off the pad and prevents pooling.

What should I put down under my hot tub?

If you’re having a base installed especially for your Hot Tub we would recommend a patio, decking area or poured concrete base. Whatever you choose make sure whoever installs it for you ensures the base is level and large enough for your Hot Tub and steps.

How many bags of concrete do I need for a 10x10 slab?

The thickness of your 10′ x 10′ slab will determine just how many bags you need. The average thickness of a 10′ x 10′ concrete slab for a shed is 4 inches thick. At 4″ thick, your 10 x 10 slab will take 56 bags of concrete that weigh 80 lbs.

How much should a 10x10 concrete slab cost?

To pour a typical 10×10 concrete slab will cost $670 to $930, a 12×12 slab for a patio will cost $796 to $1,476, a 20×24 driveway slab runs between $1,440 and $3,360, and a 24×24 slab for a garage will cost $3,058 to $5,944. Get free estimates from concrete companies near you.

How thick should concrete be for swim spa?

A swim spa by Master Spas needs a solid, level surface that can handle the weight of the swim spa. Master Spas recommends that the foundation is a reinforced concrete pad that is at least 4 inches thick.

Will 4 inches of concrete hold a hot tub?

Concrete Slab The base of reinforced concrete should be about 4 inches thick and be able to withstand a weight of at least 115 pounds per square foot, especially for larger spas. The concrete should be fully cured prior to placing the tub.

How do you build a base for a hot tub?

Gravel Base Dig out an area several inches deep and make sure the ground at the bottom is pressed flat. Fill the hole with gravel and press it down to make sure it will not shift or sink once it has weight on it. The gravel will conform to the shape of the bottom of your tub to hold it firmly in place.

How many inches of gravel do you need for a hot tub?

Make sure you are digging at least 6 inches for your base, but nothing more than that. Without enough gravel, drainage can be compromised. With too much gravel, the hot tub base may become too soft and cause damage over time.

What is a hot tub pad?

Spa pads are wonderful hot tub accessories that provide a sturdy base for most hot tubs, while still allowing for flexibility in location. People who opt for an indoor hot tub typically use spa pads so that they won’t need to do any major renovations, however, spa pads can be implemented outdoors as well!

Can a hot tub sit on grass?

It might seem like a good idea but you should not put a hot tub on grass. The bare ground cannot support the weight of a hot tub, which can be close to 5,000 pounds when filled with water. … A hot tub requires a stable surface — whether it’s a concrete slab, reinforced deck, or firmly compacted soil with crushed gravel.

How much space do I need around a hot tub?

A good rule of thumb for a hot tub is to give yourself about a foot of space on each side of the tub. This leaves room for things like opening the cover. Most covers require at least 18 inches of space behind the tub as well as a few inches on the left and right side for the arm that helps you lift the cover.

Can Neighbours complain about hot tub?

Ever been annoyed by an annoying constant sound? Bubbling hot tubs may not be for your neighbour and could be classed as a nuisance due to noise. Only cut back tree branches to the extent that they overhang your land. If you cut back into your neighbour’s property it is illegal.

What foundation does a hot tub need?

• CONCRETE. A concrete surface is an excellent base for your hot tub as this material is extremely sturdy and long-lasting. …
• DECK. Decks can be an easy choice, as they are already level and solid. …
• SPA PAD.

Can you put a hot tub on patio slabs?

Hot tubs require a level base that is able to support the weight of the hot tub when it is filled with water and bathers. You can use a concrete slab, gravel, a deck or patio pavers as options to support your hot tub.

How thick should a spa slab be?

A reinforced concrete slab of at least 100mm (4”) thick is a suitable foundation for your spa; this must be increased to a minimum of 125mm (5”) thick when installing swim spas. You must ensure this base is an even, level surface free from cracks or hollows.

How long should concrete cure before putting a hot tub on it?

They said one week is the MINIMUM; they said it takes up to 28 days for the concrete to completely cure, so they recommend 28 days before putting something really heavy (like a hot tub) on it.

Can a hot tub be placed directly on the ground?

A hot tub should not be placed on soil or on a lawn. Instead, it will need a solid platform to support all of the weight. Exposure to wet soil and grass will reduce the life of your hot tub and expose it to insects and moisture. … A hot tub should never be installed in soil or on a lawn.

How many bags of concrete do I need for a 10x8 slab?

Regarding this, “how many bags of concrete do I need for a 10×8 slab at 4 inch thick?”, its depend on thickness of slab, at 4 inches thick, generally you will need approximately either 58 bags of 60lb or 45 bags of 80lb (0.98 cubic yards or 26.4 cubic feet or 0.748 m3) of premixed concrete for a 10×8 slab.

How much concrete do you need for a 12x12 slab?

Regarding this, “how many bags of concrete do I need for a 12×12 slab?”, at 4 inches thick, generally you will need approximately either 104 bags of 60lb or 80 bags of 80lb of premixed concrete for a 12×12 slab, at 5 inches thick slab, either 131 bags of 60lb or 100 bags of 80lb premixed concrete are required, while at …

How much does an 80 pound bag of concrete cover?

30 cubic feet, 60 pounds of concrete mix yields . 45 cubic feet and an 80-pound bag yields . 60 cubic feet.

How much does a 24x30 concrete slab cost?

A 24×30-foot slab covers 720 square feet. With an average price of $6 per square foot, you may pay about $4,320 for a slab foundation. However, the price can range from $4 to $8 per square foot, resulting in a total cost between $2,880 and $5,760.