Why does my quooker keep flashing

This is called the tank’s “heartbeat” and indicates that the water is now up to temperature again and ready for use. If the light is still flashing, please try a long reset. Switch the Quooker off on top of the tank and unplug it from the electrical supply.

Why is my Quooker tap Flashing 4 times?

4 x blinking: If your tap/tank is blinking four times, followed by a short break, there is a failure with your Quooker tank.

Why is my Quooker not working?

If the lights still do not come on, unplug the Quooker and check the electrical supply socket by plugging in another appliance. If the socket is working, please change the fuse in the Quooker’s plug, then plug it back in again and try pressing the Q-shaped button on top of the tank again.

How do I reset my Quooker water filter?

If you hold the button on the top of the cold water filter for 15 seconds, you will hear a double-beep and the red light will go off. For 6 months, this will reset the alarm.

How often should my Quooker tap be serviced?

A Quooker isn’t difficult to maintain. In most cases, you only need to replace the HiTAC®-filter once every five years. Here you can read more about maintaining a Quooker appliance.

How long is Quooker warranty?

Warranty. The Quooker comes with a standard two-year warranty. Register your Quooker to benefit from this warranty, but also to let us help you more efficiently.

How long does a Quooker water filter last?

For hygienic reasons, the filters should be replaced every 12 months, regardless of the amount of water used. After 12 months, the CUBE will start beeping and the light on the CUBE tank will flash to indicate that the filters need to be replaced. The filters can be accessed under the sliding panel on top of the CUBE.

Does Quooker have a filter?

The Quooker tank contains an internal HiTAC® filter. This carbon water filter removes contaminants and impurities from your water.

How often do you need to change Quooker filter?

Depending on the quality of the water in your area, the filter should be changed approximately every 3-5 years. Depending on the type of Quooker tank you have, you may be able to change this filter yourself. We provide step by step instructions and tools with the filter.

Why is Quooker beeping?

Maintenance. The previous lifespan of a cold water filter cartridge was 6 months. … If you press and hold the button on the top of the cold water filter for 15 seconds, you should hear a double- beep and the flashing red light will disappear. This will reset the alarm for a complete 6 months.

Article first time published on

Why is my Quooker tap stiff?

When too much water and/or detergents are used to clean the Quooker tap, this could cause the mechanism inside the push-and-turn button to rust. As a result, the push-and-turn button will be more difficult to operate and feel like being stuck.

What does red light on Quooker mean?

When you first turn on the Quooker tank, a solid red light with an occasional flicker should appear on the tank and tap. This means the tank is heating up. Once the tank has fully heated the light on the tap should disappear and the light on the tank should slowly fade in and out in a gentle pulse.

What is a HiTAC filter?

The HiTAC® filter inside the boiling water tank improves the taste of the water. This carbon water filter removes contaminants and impurities from your water. The carbon absorbs chlorine, certain pesticides and organic pollutants, improves taste and eliminates odours and discolouration.

How much is a Quooker filter?

Tap priceFilter replacement frequencyQuooker£950 – £1,890Every three to five yearsGrohe£800 – £1,899

How do I register my Quooker?

You can register the Quooker on our website here. If you ever require any assistance with your Quooker just contact our service team via [email protected] or 0161 768 59 00 (select option 3 for Service). Please have your Quooker’s serial number ready – it is located at the side of the tank near the top.

Where is serial number on Quooker tap?

The serial number is located on a sticker on the side of the Quooker tank, near the top. It should begin with the letters VC or CC depending on the type of tank.

Why is my Quooker tap slow?

The filtered (cold) water will not have a steady flow and you will experience this as being a problem. If this is the case, your cold water filter is blocked, obstructing water to go through and therefore reducing the water flow . This problem can be solved by replacing your cold water filter.

Should Quooker taps spit?

Spitting/sputtering is normal upon initial start-up of your hot water dispenser.

How do I change my quooker aerator?

Aerator at the end of the tap, that you can easily replace by twisting the nozzle anti-clockwise. We recommend soaking the aerator in white wine vinegar every 12 weeks to remove limescale if required.

How do you descale a tap nozzle?

Soak Parts in Vinegar Soak the screen and other aerator parts in vinegar to dissolve mineral deposits (scale). It’s best if you can leave the parts submerged in the vinegar overnight, but at the very least, soak them until the deposits are soft enough to be removed with a toothbrush or toothpick.

How do you adjust the temperature on a Quooker tap?

The temperature of the mixer tap water can be adjusted between 40 and 60°C by turning the grey knob on the mixing valve towards ‘K’ for cold or ‘W’ for warm. The standby consumption of the Quooker is only about three pence a day.

Should I turn off boiling water tap at night?

They do not re-boil water or over-boil. But if they are left continuously on without use, the amount of heat loss is almost the same as what a kettle loses. Therefore, switching off your Quooker tap when not needed, for example at night, would help to conserve energy.

How does the Quooker work?

The Quooker system consists of a boiling water-tap on the worktop linked to a small tank in the kitchen cabinet. … The water only starts to boil when the tap is turned on and the temperature of the outflowing water drops to 100°C. While the water is flowing out of the tap, fresh water immediately flows into the tank.

What is quooker scale control plus?

The Scale Control Plus reduces the hardness of the water in order to prevent limescale build-up in the tank. This extends its lifespan and improves the taste of the water. The Scale Control Plus consists of a filter head and a cartridge, which is inserted into the head.