Why would a summarized static route be configured on a router group of answer choices

Why would a summarized static route be configured on a router? A summary route represents multiple networks. A summarized static route does not necessarily provide a better route than a routing protocol does. A default static route would provide a default gateway for a router that is connected to an ISP.

Why would a Summarised static route be configured on a router?

Why would a summarized static route be configured on a router? A summary route represents multiple networks. A summarized static route does not necessarily provide a better route than a routing protocol does. A default static route would provide a default gateway for a router that is connected to an ISP.

What is the purpose of a default static route?

A default static route is a route that matches all packets. A default route identifies the gateway IP address to which the router sends all IP packets that it does not have a learned or static route for. A default static route is simply a static route with 0.0. 0.0/0 as the destination IPv4 address.

What are two reasons why an administrator might choose to use static routing?

• Static routing is easier to maintain in large networks.
• Static routing is more secure.
• Static routing is more scalable.
• Static routing uses less router processing and bandwidth.

What is the advantage of static routing?

Advantages. Static routing, if used without dynamic routing, has the following advantages: Static routing causes very little load on the CPU of the router, and produces no traffic to other routers. Static routing leaves the network administrator with full control over the routing behavior of the network.

Which type of static route is configured with a greater administrative?

Explanation: A backup static route is called a floating static route. A floating static route has an administrative distance greater than the administrative distance of another static route or dynamic route.

What happens to a static route entry?

The static route is removed from the routing table. The router polls neighbors for a replacement route. The static route remains in the table because it was defined as static. The router automatically redirects the static route to use another interface.

On which router would a default static route be configured?

On which two routers would a default static route be configured? (Choose two.) Explanation: A stub router or an edge router connected to an ISP has only one other router as a connection. A default static route works in those situations because all traffic will be sent to one destination.

What are two advantages of static routing over dynamic routing?

Static routing requires very little knowledge of the network for correct implementation. Static routing uses fewer router resources than dynamic routing. Static routing is relatively easy to configure for large networks. Static routing is more secure because it does not advertise over the network.

What is difference between static route and default route?

Static Routing – This is the method by which an administrator manually adds routes to the routing table of a router. … Default Routing – This is the method where all routers are configured to send all packets towards a single router.

Article first time published on

Why is static routing more secure?

Static routes could be considered more secure. Because you aren’t learning any routes from any other routers over the network, there is no chance that an incorrect or unsecured route will be learned by your router.

What is a summary static route?

A static summary route is used to minimize the number of static routes in the routing table and lessen the administrative overhead that may impact the memory usage of the routers.

What is static routing advantages and disadvantages?

AdvantagesDisadvantagesIt is very predictable, as the route to the destination is always the same.If a link fails, a static route cannot reroute traffic. Therefore, manual intervention is required to re-route traffic.

What is static and dynamic routing in networking?

A static routing table is created, maintained, and updated by a network administrator, manually. A static route to every network must be configured on every router for full connectivity. … A dynamic routing table is created, maintained, and updated by a routing protocol running on the router.

What are the options to configure static routing protocols?

• To configure the switch’s default gateway: …
• To configure a static route and specify the next address to be used when routing traffic to the static route: …
• To always keep the static route in the forwarding table: …
• To prevent the static route from being readvertised:

How is a static route displayed in the routing table?

Static routes are manually added to a routing table through direct configuration. Using a static route, a router can learn about a route to a remote network that is not directly attached to one of its interfaces. The router with the next-hop IP address must be on a directly connected network. …

What is the ad value of static route?

In the case of Static Default Route, The AD value is 1.

What is a static route quizlet?

Static routes are not advertised over the network, resulting in better security. • Static routes use less bandwidth than dynamic routing protocols, no CPU cycles are used to calculate and communicate routes. • The path a static route uses to send data is known.

Which route would be automatically created when a router interface is activated and configured with an IP address?

Local routes are automatically created whenever an interface is configured with an IP address and activated. Destination network: The address of the remote network and how that network is connected. Outgoing interface: Identifies the exit interface to use when forwarding packets to the destination network.

What are two reasons why an administrator might choose to use static routing rather than dynamic routing choose two group of answer choices?

What are two reasons why an administrator might choose to use static routing rather than dynamic routing? (Choose two.) Static routing is more secure. Static routing uses less router processing and bandwidth. A network administrator notices that a correctly entered static route is not in the routing table.

What characteristic completes the following statement when an IPv6 static route is configured?

When an IPv6 static route is configured, the installation of the route can be verified with …… the “show ipv6 route static” command.

What is a characteristic of a static route that matches all packets *?

A default static route is a route that matches all packets. It identifies the gateway IP address to which the router sends all IP packets for which it does not have a learned or static route. A default static route is simply a static route with 0.0. 0.0/0 as the destination IPv4 address.

Which type of IPv6 static route is configured in the exhibit?

Which type of IPv6 static route is configured in the exhibit? Answers Explanation & Hints: The route provided points to another address that must be looked up in the routing table. This makes the route a recursive static route.

What is ad value of static route and default route?

Route sourcesDefault ADConnected interface0External BGP20EIGRP90OSPF110

How does static routing differ from dynamic routing When would you use static routing when would you use dynamic routing?

In static routing, routing tables are manually updated, while in dynamic routing, tables are automatically updated. The static routing is best for small network implementation and star topologies. It is not as good for any other topologies. Whereas dynamic routing is best for a large network implementation.

Which three statement about static routing are true?

The following statements are true regarding static route assignments: – A single static route cannot respond to network outages. – Static routes are removed from the routing table if the interface goes down. – Static routes are manually configured on the router.

Why is dynamic routing more resilient than static routing?

So static routing is easy–but not very resilient. Most installations would not use static routing. Instead, a dynamic routing protocol such as OSPF would be used. Dynamic routing takes a little more effort to plan and set up, but once the planning stage is completed, the network effectively takes care of itself.

What are the benefits of route summarization?

The advantages of summarization are that it reduces the number of entries in the route table, which reduces load on the router and network overhead, and hides instability in the system behind the summary, which remains valid even if summarized networks are unavailable.

What should be altered to enable static route to become a floating static route?

If we want to use a static route as a backup route, we’ll have to change its administrative distance. This is called a floating static route. R1 can use R2 or R3 to get to the 192.168. 23.0/24 network.

Which option shows the correctly configured IPv4 default static route?

Which option shows a correctly configured IPv4 default static route? The static route ip route 0.0. 0.0 0.0. 0.0 S0/0/0 is considered a default static route and will match all destination networks.

What are two advantages of static routes choose two?

Which two are advantages of static routing when compared to dynamic routing? (Choose two.) Configuration complexity decreases as network size increases. Security increases because only the network administrator may change the routing table. Route summarization is computed automatically by the router.